PNMA II – PROFINET Measuring Point (IP20)

Item # 114090100 – PNMA II – PROFINET measuring point (IP20) 

  • Monitoring of all protocols
  • Supports all packet sizes with no packet loss
  • All connection ports are on the front panel
  • No additional effort to connect a measuring device
  • Tested interaction with the PROFINET-INspektor® NT
  • No free-switch port necessary
  • Bi-directional data transmission up to 100 Mbps
  • No network interruption when connecting diagnostic tools

Need assistance?

Call: +46 (0)40 636 8038 
Email:  brian@lindhautomation.com

For Nonreactive Access in Profinet

The PROFINET measuring point PNMA II provides nonreactive access for telegram recording in the PROFINET and other Ethernet-based networks (e.g. Industrial Ethernet) during running production.

    • Monitoring of all protocols and support all packet sizes
    • If connecting a PROFINET-INspektor® NT via a PNMA II, only two additional patch cables are needed (no crossover cable required)
    • In case of a power supply failure the PROFINET communication via the PNMA II remains intact
    • Power supply of additional analytic tools via the UOUT (24VDC) connector
    • Analysis tools (e.g. PN-INspektor® NT or laptop) can be connected nonreactive to the two monitor jacks to monitor both communication directions simultaneously
    • For evaluation of the measurement results the telegrams from both communication directions can be overlaid
    • The PNMA II / PNMX does not discard error telegrams – it rather forwards them
    • For evaluation of the measurement results, the telegrams from both communication directions can be overlaid
    • For use in harsh environments or outside the control cabinet, the IP67-certified PNMX variant is available

 

PNMA II map