For non-reactive access in PROFINET
PNMA II - PROFINET measuring point (IP20) provides non-reactive access for telegram recording in PROFINET and other Ethernet-based networks (e.g. Industrial Ethernet) during production.
-
- Monitoring of all protocols and support for all packet sizes
- If you connect a PROFINET-INspektor® NT via a PNMA II, only two additional patch cables are needed (no crossover cable required)
- In the event of a power failure, PROFINET communication via PNMA II is maintained intact.
- Power supply of additional analytical tools via UOUT (24VDC) connector
- Analysis tools (eg PN-INspektor® NT or laptop) can be connected non-reactively to the two monitor sockets to monitor both directions of communication simultaneously
- To evaluate the measurement results, the telegrams from both communication directions can be superimposed
- PNMA II does not discard error telegrams but forwards them
- For use in harsh environments or outside the control cabinet, IP67-certified PNMX variants are available
