Diagnostic Tools for Industrial Networks

Measuring plant conditions, detecting sources of malfunction and coordinating maintenance requirements is the top priority of every maintaintence technician. Our essential tools and experienced service team supports you in the maintenance of your automation networks and fieldbus systems. Our wide range of industrial network services extends from documented commissioning measurements up to support for regular maintenance procedures to ensure system availability.

EMC Diagnostic Tools

LSMZ1 Main

Measuring Shield Currents

Avoid shield currents and measure for current leakage


Measuring Equipotential Bonding

Prove equipotential bonding according to DIN EN 50310


Intelligent Current Measuring

Detecting and evaluating parasitic currents inteligelllently


EMV INspektor V2 EMC

Electromagnetic Interferences

Detecting interference currents along fieldbus and cable paths

PROFINET Diagnostic Tools

PROFINET Diagnostic Set

PROFINET Diagnostic Set

All the essential tools in one set

Diagnostic Duo Screen USE

PROFINET Diagnostic Duo

Detecting cable problems to the meter

Profinet Inspektor NT USE


Intelligent measuring point

PROline Test no cable

PROline Test

Detecting cable problems 

PROscsn Active USE

PROscan Active

Detect your network topology

PROFIBUS Diagnostic Tools



Fast and Precise Quality Diagnosis



For reliable cable test in PROFIBUS



Measuring and avoiding shield currents

Diagnostic DUO Closed

PROFIBUS Diagnostic Duo

Online & offline analysis in a set

Profibus Set USE

PROFIBUS Diagnostic Set

All the essential diagnostic tools in one set

Profibus Inspektor USE


Monitors the logical data exchange

AS-i Diagnostic Tools
Asi Diagnostic Set

ASi Diagnostic Set

Fast and simple ASi system analysis

ASi Insulation Modular

ASi View -Tester

Fast and Simple ASi System Analysis

CANbus Diagnostic Tools
CANbus View XL III

CANbus View XL III

Universal CANbus Measuring Tool

Industrial Ethernet Diagnostic Tools

PROline Test

Detect Installation Problems Accurately to the Meter

Maintenance instead of repair:

Identify and fix sources of interference in a targeted manner – before problems or breakdowns occur.

Every plant ages. The communication networks of the plants are also affected by this. Whether it’s wear and tear due to use or external influences from the production environment, it often starts with inconspicuous, sporadic anomalies. Since these often remain undetected, the potential for faults can increase and endanger the operation of the plant. But it doesn’t have to come this far!

Network maintenance by external service providers or with your own staff

– It’s not the method, it’s the result that matters

By regularly or permanently checking the communication quality in the plant network, failures can be almost completely avoided. This preventive maintenance (cf. “predictive maintenance”) can be carried out by trained maintenance personnel as well as by external specialists such as Indu-Sol service technicians. When making a decision, it is important to weigh up the respective costs.

  • Network maintenance with trained personnel and required equipment
    Monitor, control and maintain your plant networks completely independently. The necessary professional training and materials (including suitable measuring equipment) must be available.
  • Network maintenance by external maintenance service provider
    Commission an external specialist with the regular inspection and maintenance of your plant networks. The services vary depending on the provider and the contractual agreement.
  • Supported network maintenance with your own staff and external support
    Relieve your maintenance: Based on maintenance data (thanks to e.g. permanent network monitoring), an external partner supports your maintenance in time-saving fault clearance or maintenance, if required.

Our expert advice: For maximum availability, we recommend regular testing of the communication quality of your network immediately starting with commissioning of the system. These tests can optionally be carried out by your maintenance staff. (Further technical training / suitable measuring equipment required)